PRODUCT DATA SHEET
PM-CRC
Heavy Duty Seamless Surfacing System
PRODUCT DESCRIPTION
PolyMax-CRC is a unique combination of compatible liquid applied polymers designed to form a seamless floor, wall and ceiling envelope. Integrated junctions and no visible joints, affords the customer the ultimate cleanability and resistance to microbial growth.
PolyMax CRC-R is a fiberglass reinforced pigmented epoxy system recommended for use over dry wall or wherever extra puncture protection is needed.
PolyMax CRC-UR is a fiberglass reinforced system finished with UV stable chemical resistant urethane.
PolyMax CRC-NR is a non-reinforced pigmented epoxy system which is most commonly used over hard substrates such as concrete or cement board.
TYPICAL USES
PolyMax-CRC systems are most commonly used in clean rooms, surgical suites, laboratories, shower enclosures, animal colonies and special food processing areas. These systems are designed to withstand the rigors of heavy industrial use and maintain their inherent superior aesthetic.
LIMITATIONS
Avoid on or below grade applications where water vapor transmission is greater than 5 lbs./1000 sq. ft. per 24 hrs. or where ambient operating temperatures exceed 150 F.
Substrate must be sound, dry and free of surface contamination. Ambient air temperature must be at least 40 F and 3 F above dew point during application.
PACKAGING
Standard packaging for liquid portion is 5 gallon pails. Unitized, larger or smaller packaging is available by special order. Unitized packaging is not recommended due to variable job site conditions.
STORAGE
Store in a dry area at temperatures between 50 F and 90 F. Protect product from freezing and excessive heat. Minimum shelf life is one year from date of manufacture when stored properly.
THICKNESS
PolyMax-CRC is typically installed at a 1/8" to 3/8" in thickness. Additional thickness may be specified for special uses.
FEATURES
- Seamless
- Very Impact Resistant
- Variety of Finishes
- Chemical and Stain Resistant
- Minimal Odor During Installation
- Quick Installation
- Economical Price
BENEFITS
- Sanitary
- Smooth & Even Traffic Surface
- Slip Resistant or Very Easily Cleaned
- Reduced Maintenance Costs
- Can be Installed in Most Environments
- Reduced Down Time for Application
- Excellent Return on Investment
COMPLIANCES
PM-CRC is compliant with the State of California Air Resources Board approved architectural coatings volatile organic compound (VOC) rule, San Diego APCD Rule 67, New York City AQMD Rule 205, New Jersey VOC and USDA incidental contact requirements.
CHEMICAL RESISTANCE
PM-CRC Epoxy is very resistant to most common industrial chemicals and solvents. An abbreviated list follows. For more comprehensive chemical resistance analysis, contact Tele-Tech at 1-405-495-8848.
| REAGENT |
30 MIN. |
24 HRS. |
7 DAYS |
| Acetone |
F |
F |
F |
| Acetic Acid |
NA |
F |
F |
| Ammonium Hydroxide (28%) |
NA |
NA |
NA |
| Clorox |
NA |
NA |
D |
| Ethylene Glycol |
NA |
NA |
NA |
| Gasoline |
NA |
NA |
NA |
| Isopropyl Alcohol (98%) |
NA |
NA |
NA |
| Mineral Spirits |
NA |
NA |
NA |
| Nitric Acid (10%) |
NA |
D |
F |
| Nitric Acid (70%) |
F |
F |
F |
| Skydrol #500 |
NA |
NA |
NA |
| Sulfuric Acid (10%) |
NA |
D |
F |
| Sulfuric Acid (90%) |
F |
F |
F |
| Sodium Hydroxide (30%) |
NA |
NA |
NA |
| Toluene |
NA |
F |
F |
| Urine-Synthetic (6.6%) |
NA |
NA |
NA |
NA = NO ATTACK D = DISCOLORED F = FAILED
Physical Properties
| Physical Property |
Test |
Result |
| Compressive Strength |
ASTM C-579 |
12,200 psi |
| Tensile Strength |
ASTM D-638 |
5,200 psi |
| Flexural Strength |
ASTM C-580 |
5,351 psi |
| Bond Strength |
ASTM C-882 |
> 300 psi |
| Linear Shrinkage |
ASTM C-883 |
nil |
| Hardness |
ASTM D-2047 |
84 @ 75 F |
| Water Absorption |
ASTM C-413 |
0.019% |
| Flammability |
MIL-D-3134F |
F.R. |
| Indentation |
MIL-D-3134F |
0.010"/0.00" |
| Elongation |
ASTM D-638 |
2.1% |
AVAILABILITY
PolyMax products are available only through selected and approved applicators and distributors. This material is intended for commercial and industrial installations and should be installed by skilled, seamless flooring technicians. It is neither designed for nor available for consumer use.
Custom design assistance may be obtained by contacting PM Tele-Tech at 1-405-495-8848 8:00 AM through 4:00 PM Central time.
COLOR SELECTION
Standard colors are
- Light Gray
- Tile Red
- Desert Tan
(Custom colors are available in 250 gallon minimums at additional charge)
CAUTION:
PolyMax CRC systems are intended for use by professional applicators. Results are highly dependent upon the skill of the applicator. Although materials are safe if properly handled, all personnel who are exposed to any chemicals must read and completely understand precautions and warnings on label and MSDS prior to use.
COMPONENTS OF OR PRODUCTS USED WITH AND DURING THE INSTALLATION OF POLYMAX COATINGS PRODUCTS MAY INCLUDE HAZARDOUS MATERIALS. All personnel exposed to or handling materials before and during installation must read and fully understand label precautions and Material Safety Data Sheets.
LIMITED WARRANTY
PolyMax COATINGS are manufactured to meet the highest level of consistency and quality for their intended use. All PolyMax materials are warranted to meet the physical properties as listed above. Should any PolyMax COATING be proven to be defective within one year of the date of shipment, the material will be either replaced or at our discretion, a credit for the full purchase price will be issued. The successful performance of seamless flooring is highly dependent upon many factors beyond our control. Therefore, except for such replacement or refund PolyMax and it's affiliates MAKE NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESS, DESIGN COMPATIBILITY OR MERCHANTABILITY, RESPECTING ITS COATINGS. Other than that stated in the foregoing, PolyMax and its affiliates shall have no other responsibility or liability, including direct and/or indirect and/or consequential damages and/or damages from delay and/or damages to any third party with respect to the use of it's materials. Claims regarding product quality must be received in writing within 30 days of discovery of defect.